Selasa, 06 September 2011

Professional Motorsport World (2011) Predictive Lap Timing

PRLog (Press Release) - Sep 05, 2011 - Racelogic has found that using GPS position to align multiple laps for the purpose of predictive lap timing is more accurate than the traditional methods of using distance or time.

The practice of predictive lap timing is not new. Traditionally, circuit data logging systems used roll-ing distance to enable users to compare different laps to show where improvements can be made. This works well, but relies on the driver maintaining similar racing lines per lap to obtain a meaningful alignment and does not allow users to compare different lines or move off line to over 2011 Chrysler 200 Convertible take a competitor.

UK based Racelogic have found a new method. Using their accurate Video VBOX data logger, they have found that using GPS position to align two laps is more accurate than using distance or time. This is then shown in real time on a high brightness OLED display in clear view of the driver. Racelogic claim this enables the driver to quickly understand the effects of different race techniques on overall lap times.

Although the position data itself may only be accurate to within a few meters, the typical average race speed is well in excess of 30m/sec, cutting errors to less than 1/10th of a second.

To demonstrate, Racelogic's Founder, Julian Thomas, examines two laps of the 2.6km Silverstone National circuit recorded by a professional race driver: "The rolling dista automobile news nce variation was 11.6m even though the lap time difference was only 0.6 seconds," he notes. "This equates to an alignment error when using distance of 0.3 seconds, even on a short track with a consistent driver. On a longer track with an inconsistent driver the error can be over a second." Thomas adds, "But by using GPS position, updated 10 times a second, we can show the real time lap compari ni ssan GTR specification son accurate to within 1/10th of a second, regardless of the line taken by the driver or the length of the track."

Infiniti m hybird >So how can race drivers and engineers make use of this data? Thomas explains: "With GPS offering such accurate data, we've found that drivers intuitively find ways of cutting times. They use it not only for qualifying, but also in endurance racing to maintain a consistent pace." He adds: "For example, drivers can instantly see the very small but accumulative effect of following a car in the distance to pick up a slight slip-stream, and the effect of relaxing the steering wheel coming onto a straight. Drivers can also now instantly evaluate changes in driving line which is almost impossible when using the time/distance method.

Racelogic's Video VBOX is now available as part of a predictive lap timing display package special offer. On display on Racelogic's stand 4065 at the PMW show and priced at just £1,195 + tax, race drivers at all levels are set to benefit from the new technology.


Get automobile news and garbage compactor

Corby Motorsport Thrilled to Offer Gaz Coilovers

PRLog (Press Release) - Sep 05, 2011 - Corby Motorsport http://www.corbymotorsport.com is an established online supplier of quality coilover suspension to motor vehicle owners, car enthusiast and racing teams across the nation, and is extremely pleased to offer a range of Gaz coilovers in its vast portfolio of products.  

The Corby Motorsport website offers everything from air filters and exhaust, brake pipes and dump valves, box mounts and roll cages to adjustable dampers and coilover kits.  The current coilover kits selection is extensive and covers names such as V-Maxx, HSD, AP, Weitec, Cusco, Bilstein, BC, KW and AVO, and now the team at Corby Motorsport are pleased to announce the latest range of Gaz coilovers.  

Gaz Shocks is a leading man Infiniti m hybird ufacturer of coilover kits, and is recognised in the motor world for its high performance products and its i automobile news nvolvement in suspension manufacturing since the 1960s.  Corby Motorsport stocks a selection of G 2011 Chrysler 200 Convertible az Shocks coilovers and is proud to be able to offer such expert products from a world renowned brand.  

Corby Motosport is dedicated in o ni ssan GTR specification ffering topq quality products at the most cost effective prices, and all products can be found on the easy-to-use shopping website.  Visit Corby Motorsport to find out more: http://www.corbymotorsport.com/

ABOUT CORBY MOTORSPORT:

Corby Motorsport has over five years of experience in the industry and the company's convenient shopping website provides car enthusiasts and racing teams with the huge choice of coilover kits, air filters, exhausts and more.  

See the complete product range here: http://www.corbymotorsport.com/

CONTACT:Corby Motorsport22 Lavender CloseCorby NN188PD

01536 744256


Get automobile news and garbage compactor

Senin, 05 September 2011

Business Monitor International launches a brand new Nordics Power Report

PRLog (Press Release) - Sep 05, 2011 - Business Monitor International (BMI) has introduced to its portfolio a brand new Nordics Power Report, covering Denmark, Finland and Sweden. This addition adds depth to BMI's global power market views, and its analysis of the European power sector.

The Nordic countries covered in the report are mature electricity markets and, according to BMI's forecasts, they will experience modest growth both in terms of generation and capacity over the forecast period (2011-2015). Considering that electricity demand is forecast to see only limited growth between now and 2020, the main priority for Denmark, Finland and Sweden is to replace ageing plants with additional cleaner generation capacity.

The Report provides key forecasts and in-depth analysis of the Nordic power (http://store.businessmonitor.com/power/nordics_power_report ) market, including electricity generation, consumption, trade, power generation costs and transmission. The industry forecasts for gas, coal, oil, nuclear, hydro and renewable are supported by BMI assumptions and analysis of key risks to BMI core scenario. Within this, the report analyses the impact of regulatory changes, recent industry developments and the background macroeconomic outlook. It also features a competitive landscape of the Nordic power markets comparing multinational and national operators by sales, market share, investments, projects, partners and expansion strategies.

Electricity consumption and generation in Denmark, Finland and Sweden is expected to grow only moderately in the coming years. However, weak demographic dynamics and slow economic recovery as the result of government programmes are expected to impact power markets across Europe. BMI holds a similar outlook for Central and Eastern Europe with the exception of the Turkey power (http://store.businessmonitor.com/power/turkey_power_report ) sector, which we expect to exhibit strong growth, driven by a sharp rise in its power consumption over the coming years.

BMI's portfolio of products and services provides comprehensive analysis of the global power industry and enables industry professionals, strategists, sector analysts and equity investors to identify key market opportunities and avoid market risks wherever they operate.

About Business Monitor International (http://www.businessmonitor.com/ ):Business Monitor In corsa ory/ferrari">ferrari ternational (BMI) established in 1984 with headquarters in London is recognised as a leading independent source for analysis and forecasts on Country Risk and Industry, spanning 175 countries. BMI provides research to multinat alfa romeo "http://www.who-sells.com">rc helicopter and car market place ional corporations, banks, funds, research centres and governments in 140 countries around the world, including more than 400 of the Fortune Global 500 companies.

PR contact:Matthew BrooksHead of Strategic Analysis & Product Development Senator House85 Queen Victoria StreetEC4V 4ABLondonUnited Kingdom+44 (0)20 7248 0468 www.businessmonitor.com


Get automobile news and garbage compactor

Some Carreg Customers Are Building Their Own Number Plates

PRLog (Press Release) - Sep 04, 2011 - 4th September 2011.  Staffordshire, UK. The choice of a number plate mustang car may seem limited to the buyer, who has the choice of either buying from an auction or from a private number plate dealer. Both of these choices have issues for the consumer.

First of all, there is the auct automobile news ion, there could be intense competition for some number plates and therefore in the heat of the moment, the buyer can sometimes pay too much for a specific number plate and this does nothing for the industry or consumer confidence.

Then there is the personalised number plate dealer, the consumer has to make sure that the chosen dealer is registered with the DVLA and that they have some time in the industry, otherwise the buyer could be looking at problems with the DVLA etc.

There is an interesting part of the number plate industry that is being employed by DVLA approved dealers; this is where the buyer is able to build their own number plate, not literally but by using an online service such as the one at Carreg, http://www.carreg.co.uk/number_plates/build. This s Infiniti m hybird ervice allows the consumer to put in their required letters and numbers, the system does the rest.

The customer is presented with either an exact match or the choices available with the prices and other costs such as the DVLA charges, everything is up front and the buyer actually gets to see what the number plate would look like and if not satisfied can tweak it a little until it looks perfect.

About Carreg.co.uk: The company was founded in 1988 with only a handful of personalised registration number comm bmw M5 specification ission sales, they are celebrating their 22nd anniversary and the company has a seven million strong private number plate database as well as considerable stock.

Carreg.co.uk are members of all trade-governing bodies: C.N.D.A (Cherished Numbers Dealers Association) M.I.R.A.D (Members of the Institute of Registration Agents & Dealers) & R.N.C (Registration Number Club), and the F.S.B (Fed of Small Businesses).


Get automobile news and garbage compactor

Sabtu, 03 September 2011

Emotional Aftermath of Hurricane Will Far Outweigh the $2 to $7 Billion in Physical Damages

PRLog (Press Release) - Sep 02, 2011 - Early estimates of damages left by Hurricane Irene are between $2 billion and $7 billion dollars, the Los Angeles Times reported last night. Barack Obama warned car news Monday that the damage from Hurricane Irene will be felt for some time. Speaking from the Rose Garden he said, "This is not over. The effects are still being felt across much of the country."

Cathryn Taylor, author of the bestselling Inner Child Workbook, states that the consequences resulting from the emotional aftermath of Hurricane Irene, like Katrina, will far outweigh even the dollar figure of damage. "When unpredictable eruptions of mother nature - such as the destruction of hurricanes in the East co-mingle with the stress most of us experience in our d aston martin aily pursuits, we end up feeling overwhelmed, afraid -- out of control and full of despair," the author said in an interview this morning. "This coupled with the most recent economic challenges have brought an even more pervasive sense of worry into our hearts, minds and souls.

How do we  cope?  How do we deal with this mass grief as it weaves with our personal grief?  Taylor srtates, "We don't.  We are a society in mourning with few adult tools to grieve. These recent events, combined with the stresses of day-to-day life, have thrown most of us into the aftermath of confusion and fear - struggling with an underlying anxiety that erupts in our living rooms, in the workplace, on the freeways and in every area of our lives.

"Yet," suggests Taylor, "Tragedies - personal and global alike - can ignite a determination in us to break out of our shell and move beyond our immediate response of confusion and fear. Most just need a map on how to do so."

Taylor's Inner Child Workbook, originally published by Jeremy Tarcher, Inc. in 1991, is now celebrating its 20th year in publication and its 37th printing. One of five books p audi ublished in the early 1990's which popularized the concept of the inner child, Taylor says it was the launching pad for her own creativity. She continued to evolve this concept in four more self-published books and five E-Books – all offering solutions and techniques on championing the child within all of us. Her most recent contribution to this field is the creation of "interactive tapping", an advanced technique of the new energy therapy based on Gary Craig's Emotional Freedom Technique, EFT.

Cathryn, also a licensed counselor, uses tapping in her Life Style Coaching practice to teach clients how to neutralize disruptions which occurred in their energy system at the time of a traumatic incident. Taylor explains, "What happens is that a part of our psyche goes into an emotional spasm an auto part d it keeps firing off until the original energy disruption is corrected and resolved. If the incident is related to a childhood wound then that incident or experience is triggered, as well, and must be addressed.

To celebrate this 20 Year Celebration, Cathryn is offering a 20-Week package in which she is bringing the Inner Child Workbook into the 21st Century.  Each week she will  take a chapter in the original workbook and integrate it with her latest written material, her audio and video recordings and offer EFT Sequences which enhance the original exercises.   It is truly the next generation of the Inner Child Workbook.

For More information visit  www.eftforyourinnerchild.com.or www.joincathryntaylor.com or call 612-710-7720.

Cathryn Taylor is licensed in the state of California since 1979 as a Marriage and Family Therapist. She is certified in Chemical Dependency and is now licensed in the state of Minnesota as an Alcohol and Drug Counselor and as a Marriage and Family Therapist. She is the author of five books including The Inner Child Workbook, which is considered a classic in the inner child field and has positioned Taylor as one of the field's leading experts. She has been conducting workshops, lectures and classes for the past twenty-six years and has a private practice in Minneapolis Minnesota and San Rafael, California.


Get automobile news and garbage compactor

Jumat, 02 September 2011

The Ford Ranger Global Challenge Voting Opens Next Week

Sep 01, mustang car 20 < Infiniti m hybird a href="http://todaynewsmatic.com/755/chrysler-200-convertible-specifica tion.html">2011 Chrysler 200 Convertible goverment technology 11 News


Get automobile news and garbage compactor

Long-term effects of credit crunch seen in shortage of 3 year old used vans, reports Anchor Vans

PRLog (Press Release) - Sep 02, 2011 - Padworth UK, Anchor Vans – one of the leading vendors of used vans in the UK has reported a shortage of three year old used vans available in the used commercial vehicles market. The shortage is a direct result of the credit crun corsa ch that hit the economy three years ago. For more information call rc helicopter and car market place 0118 9710 230 or go to www.usedvans4sale.com.

"We've noticed a distinct shortage of used vans that are in the cadillac 3 year old bracket,"said Simon Joyce, Sales Director for Anchor Vans. "We know this is a direct result of the credit crunch because when it hit three years ago many companies with fleets of commercial vehicle acura s didn't buy new replacement vehicles. Everyone was tightening their belts and making do with what they had for as long as possible."

"Now, three years later, those vans which would normally have been bought new that year simply haven't trickled into the used van market,"Simon explained. "The impact can be seen in prices of used vans which are going back up due to the shortage not being able to easily meet the demand for 3 year old commercial vehicles. Many people have seen the long-term effects of the credit crunch,"Simon concluded, "this is just the way it's impacted upon our industry."


Get automobile news and garbage compactor

Rukse Releases Heavy Duty Aftermarket Replacement 1997-2002 Ford Expedition Lower Control Arms.

PRLog (Press Release) - Sep 01, 2011 - Ruk Development Inc. (Rukse), an innovator and manufacturer of racing inspired products introduces an aftermarket heavy duty control arm set for 1997-2002 Ford Expedition. Stock or OE control arms are made of thin stamped steel. Stock arms corrode quickly and are prone to breakage. Rukse heavy duty control arms replace weak OE Expedition control arms with a heavy duty long lasting alternative. Rukse control arms are made of heavy duty 1-3/4" dia. x 1/4" wall DOM tubing, polyurethane bushings, and thick walled bolt sleeves. Rukse control arms are powder coated to protect from road debris, corrosion, and impact damage. "Ford Expedition owners demand the finest performance from their vehicle, we solve a necessary need by replacing weak control arms with a quality heavy duty replacement" states Brock Holmes, Market Infiniti m hybird ing Director.  "We want to provide consumers with high quality products that outlast the vehicle. C android application ustomers don't want to buy aftermarket parts and then a few months down the road see that their hard earned money was wasted on a non-quality part."For more information, please vi bmw M5 specification sit www.rukproducts.com or contact Brock Holmes, Company's Marketing Director, at (801) 872-7976.

About RüK Development first drive audi a6 Inc. RüK Development is a technology based company developing "Strategically Engineered" technologies and products for the automotive and industrial markets. Headquartered in Sandy, Utah, the company is committed to the development of new technologies and bringing these products to market through retail, wholesale and distribution channels. Sales representation and dealers wanted. For additional information please visit the RüK Development website at: http://www.rukse.com

Press Contact: Brock HolmesRüK Development Incorporated801-872-7976service@rukse.com


Get automobile news and garbage compactor

Kamis, 01 September 2011

Comprehensive Logistics Sponsors Global Logistics Conference

PRLog (Press Release) - Sep 01, 2011 - YOUNGSTOWN, Ohio  — Comprehensive Logistics Inc. (CLI), a provider of custom-engineered supply chain management, sequencing and value-added assembly capabilities, will serve as a Silver Sponsor of the Automotive Logistics Global Conference 2011 in Dearborn, Mich., Sept. 27-29.

Each year, the Automotive Logistics Global Conference attracts hundreds of senior executives from original equipment manufacturers (OEMs), tier-one suppliers and logistics service providers (LSPs) from around the world. Presented by Automotive Logistics magazine, the event features workshops, networking opportunities, supplier exhibits and high-level presentations exploring the latest trends in global logistics. CLI also bmw M5 specification sponsored the 2010 conference.

Th goverment technology is year, the event will focus on the need for greater visibility throughout the supply chain. Industry thought leaders will present technologies and strategies that reduce risk and provide more control over operations.

At its booth, CLI will demonstrate its sophisticated, Internet-based supply chain technology. The proprietary software provides manufacturers with real-time information at the item level. Using any web-connected device, such as a computer, smartphone or tablet PC, CLI's clients can access detailed views of location, status and pro raising chickens cessing of material as well as monitor inventory and production levels and view pending shipm automobile news ents. There is no software to install or maintain, and the system is accessible anytime from any location.

Conference attendees will also learn about CLI's complex sequencing and value-added assembly capabilities. The company sequences hundreds of part numbers for just-in-time delivery to production lines and, in the past year, has processed more than 1,000 changes with zero errors. CLI's company-wide defective parts per million (DPPM) rate is less than five. At the same time, the company offers a 99.97% inventory accuracy rate and a 99.4% on-time delivery rate.    

In its value-added assembly processes, CLI collects data by both part and process to protect manufacturers from liability and assist with future warranty claims or recall issues, even years after an initial assembly was first produced. CLI can provide the precise amount of torque delivered to an individual bolt, along with the identification number for the product that received the bolt.

Clients can also access any or all data collected by CLI's integrated line-control software. Torque monitoring systems capture, store and communicate live torque, angle and yield values for every fastener installation, while process control software provides an extra layer of data analysis, enabling detailed views into process capability for specific installations. When armed with this level of detail, manufacturers are better able to monitor, control, identify and respond to process and equipment variation.

Since all of CLI's physical processes, business transactions and engineered solutions are transparent, clients maintain control over outsourced operations while still reducing costs, increasing efficiency, decreasing risk and improving overall supply chain performance.  

For more information, visit CLI at the Automotive Logistics Global Conference.


Get automobile news and garbage compactor

AIM Attains Microsoft Silver ERP Competency

PRLog (Press Release) - Sep 01, 2011 - [Fraser, MI – August 31, 2011] AIM Computer Solutions, Inc, a leader in automotive-specific ERP solutions for the small to medium sized automotive component supplier, announced today that they have attained Microsoft Silver ERP Competency as an Independent Software Vendor, ISV.  This certification recognizes AIM's expertise and impact in the technology marketplace.  AIM's Silver Competency distinguishes them among the top 5 percent of Microsoft partners worldwide.  This achievement is attained through proven expertise in areas of software development and Enterprise Resource Planning.  

AIM Computer Solutions, Inc. first attained Microsoft Partnership status in 2007 and since then has been maintaining that certification for every year thereafter, even though the requirements for the competency has been elevated to higher standards.  "The fact that Microsoft has raised the requirements for this recognition is not bad news to AIM", says Jerry Czernel, VP of Operations, at AIM Computer Solutions. He continued, "We actually welcome the higher standards for excellence as a prescreening mechanism for possible new customers."

The Microsoft Partner Program was launched in October 2003 and represents Microsoft's ongoing commitment to the success of partners worldwide. The program offers a single, integrated partnering framework that re raising chickens cognizes partner expertise, rewards the total impact that automobile news partners have in the technology marketplace, and delivers more value to goverment technology help partners' businesses be successful.

About AIM Computer Solutions, bmw M5 specification Inc.http://www.aimcom.com/AIM is the industry leader for a complete ERP software solution tailored to the small to medium sized repetitive manufacturers with a focus on automotive suppliers.  AIM Vision® provides a single source for automotive EDI integration into production scheduling complete with demand smoothing to accommodate work schedules, and lean manufacturing and supply chain management

AIM is a proud member of GPUG, Automation Alley and the Automotive Industry Action Group

About MicrosoftFounded in 1975, Microsoft (Nasdaq "MSFT") is the worldwide leader in software, services and solutions that help people and businesses realize their full potential.


Get automobile news and garbage compactor